Mazda MX-30 - Modern design, innovative technology, electrifying driving experience with an electric motor
Untitled document
The newly designed car was presented at the 2019 Tokyo Motor Show in Tokyo Big Sight, the world-famous exhibition center on the man-made island of Odaiba in Tokyo Bay. The option of reserving the model as a First Edition against a deposit of 1,000 euros has been widely used since then. Much of the Mazda CX-30 presented in spring 2019 has been adapted; regardless of this, the MX-30 has been completely redesigned.
The technical data make you sit up and take notice!
The Japanese conglomerate Hitachi from Tokyo is supplying the 143 hp electric motor. The lithium-ion battery from Panasonic from Kadoma in the Osaka prefecture has a range of a good 200 km according to WLTP. WLTP stands for Worldwide Harmonized Light Vehicles Test Procedure as a globally standardized method for measuring power consumption in cars, also recognized by the EU. According to the NEDC, the ECE guideline for measurements according to the New European Driving Cycle, the mileage is a good 260 km.
Increase in driving comfort with SPACCER ®
The already existing comfort with driving feeling and suspension is clearly topped again by the vehicle elevation by SPACCER ® . The SPACCER ® Made in Germany is a patented lift kit for the Mazda MX-30 either on the front axle and / or on the rear axle. The vehicle owner can choose from four different heights, from 12 to 48 mm. This additional ground clearance is literally good for the Mazda SUV. An optionally available rubber profile can also be inserted into the lower groove of the SPACCER ® . It causes a higher position by a further three millimeters. This allows the level of elevation to be fine-tuned. At the same time, the shock-absorbing effect of the rubber increases driving comfort and dampens the noise.
SPACCER ® Unique for every Mazda MX-30 according to the chassis number
Each SPACCER ® spiral ring made of high-strength special aluminum is individually made for each vehicle based on the chassis number. Both independent workshops and authorized Mazda workshops offer installation. The somewhat talented car owner can also try to raise his new MX-30 with the SPACCER ® .
Here are the SPACCER ® advantages at a glance
- 100% accuracy of fit thanks to custom-made products for every Mazda MX-30
- high-strength special aluminum black anodized
- Multilingual assembly instructions plus TÜV report
- Noticeable improvement in wheel mobility and damping of chassis noise
SPACCER in Kürze
- 100 Prozent Passgenauigkeit durch Sonderanfertigung anhand der einzelnen Fahrgestellnummer
- Niveauausgleich bei permanenter und/oder sporadischer Zuladung
- Verbesserung der Radfreigängigkeit
- TÜV-Prüfbericht inklusive
- Ausführliche Montageanleitung für Werkstatt und Selfmade
- Geeignet für Blattfedern und für Spiralfedern
SPACCER Germany
Von seinem Firmensitz im bayerischen Illertissen bei Neu-Ulm aus beliefert SPACCER® private sowie gewerbliche Kunden weltweit. Die Produktion erfolgt ausschließlich in Deutschland mit dem Qualitätsmerkmal Made in Germany. Eine SPACCER®-Präsenz in mehr als zwölf Dutzend Ländern garantiert kurze Reaktions- und schnelle Lieferzeiten. Weitere Informationen erhalten Sie unter presse@spaccer.com