Isuzu D-Max
We offer lift kits for all models from Isuzu:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Isuzu. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100%. The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Isuzu D-Max 2.5 CRDi | TFR, TFS | 2499 ccm, 85 KW, 116 PS | 2012/06-2016/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Isuzu D-Max original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Isuzu Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
Please select:
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
117 Amigo SUV Ascender Aska I Aska II Aska III Axiom SUV Bellet Bison Bus Bison Pritsche/Fahrgestell Campo D-Max D-Max I D-Max I Pritsche/Fahrgestell D-Max II D-Max II Pritsche/Fahrgestell D-Max III D-Max III Pritsche/Fahrgestell D-Max Pritsche/Fahrgestell Elf Kasten Elf Pritsche/Fahrgestell Fargo Bus Fargo Kasten Filly Florian Florian Kombi Frontier Gemini Gemini Coupe Gemini Stufenheck Impulse KB LUV Midi Bus Midi Kasten Midi Van MU MU 7 Geländewagen Geschlossen MU Kasten/Geländewagen Geschlossen MU-X MU-X Geländewagen Geschlossen MU-X SUV Oasis Mini Passenger Van Panther Piazza Pick-Up Pick-up Standard Cab Pick-up Rodeo Rodeo Geländewagen Geschlossen Rodeo Pick-up TF Pick-up TFR/TFS Pick-Up Trooper Trooper I Trooper I Geländewagen Offen Trooper I Soft Top Trooper II Trooper II Geländewagen Offen Trooper II Soft Top Trooper III Trooper III Soft Top Trooper Soft Top Vega Vehicross Wizard Other / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
