Mazda MX-5 RF
We offer lift kits for all models from Mazda:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Mazda. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100%. The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|
SPACCER fitting following suspension springs
SPACCER® will fit Mazda MX-5 RF original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Mazda Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
Please select:
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
1000 121 I 121 II 121 III 121 III Kasten/Schrägheck 121 Metro 1300 1800 Stufenheck 2 2 Schrägheck 2 Stufenheck 3 3 Kasten/Schrägheck 3 Schrägheck 3 Stufenheck 323 323 Astina IV 323 Astina V 323 Astina VI 323 C IV 323 C V 323 F IV 323 F V 323 F VI 323 F VI Schrägheck 323 I 323 I Station Wagon 323 II 323 II Hatchback 323 III 323 III Hatchback 323 III Station Wagon 323 IV 323 P V 323 Protege V 323 Protege VI 323 S IV 323 S V 323 S VI 5 6 6 Hatchback 6 Kasten/Kombi 6 Kombi 6 Schrägheck 6 Sport 6 Sport Kombi 6 Station Wagon 6 Stufenheck 616 626 I 626 I Coupe 626 II 626 II Coupe 626 II Hatchback 626 III 626 III Coupe 626 III Hatchback 626 III Station Wagon 626 IV 626 IV Hatchback 626 V 626 V Hatchback 626 V Station Wagon 6E 8 818 818 Coupe 818 Kombi 929 I 929 I Kombi 929 II 929 II Coupe 929 II Kombi 929 III 929 IV 929 V AZ Wagon AZ1 Azoffroad B-Serie B-Serie Pritsche/Fahrgestell B-Series B-Series (Inc Bravo) B-Series Bravo Biante Bongo Friendee Bongo Truck Pritsche/Fahrgestell Bongo Van Bus Bongo Van Kasten BT-50 BT-50 II Pick-up BT-50 Pick-Up BT-50 Pritsche/Fahrgestell Carol CX-3 CX-30 CX-5 CX-5 Van CX-60 CX-7 CX-80 CX-9 Demio E Bus E Kasten E-Serie Bus E-Serie Großraumlimousine E-Serie Kasten E-Serie Pritsche/Fahrgestell E-Series Eunos 30X Familia IV Familia Van Festiva Fighter Pick-up Flair Flair Crossover Flair Wagon J80 Bus Millenia MPV I MPV II MPV III MX-3 MX-30 MX-5 I MX-5 II MX-5 III MX-5 IV MX-5 RF MX-5 RF Targa MX-6 Navajo Geländewagen Geschlossen Premacy Premacy Van Rustler RX 5 RX 7 I RX 7 II RX 7 II Cabriolet RX 7 III RX 8 RX-2 Coupe RX-2 Stufenheck RX-4 Coupe RX-9 Scrum Scrum Truck Spectron Tribute Verisa VX-1 Xedos 6 Xedos 9 Other / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
