Maxus D90 Pro
We offer lift kits for all models from Maxus:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
The SPACCER car lift kit for your Maxus. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100%. The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Maxus D90 Pro 2.0 | -- | 1995 ccm, 160 KW, 218 PS | 2020/04-2024/12 |
| Maxus D90 Pro 2.0 4WD | -- | 1995 ccm, 160 KW, 218 PS | 2020/04-2024/12 |
SPACCER fitting following suspension springs
SPACCER® will fit Maxus D90 Pro original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Maxus Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
Please select:
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
D60 D90 D90 Pro Deliver 7 Kasten Deliver 9 Kasten Deliver 9 Pritsche/Fahrgestell Edeliver 3 Kasten Edeliver 3 Pritsche/Fahrgestell Edeliver 5 Kasten Edeliver 7 Kasten Edeliver 9 Kasten Edeliver 9 Pritsche/Fahrgestell Eterron 9 Pick-up Euniq 5 Euniq 5 Van Euniq 6 Euniq 7 G10 G10 Großraumlimousine G50 Mifa 7 Mifa 9 T60 T70 T90 V80 Bus V80 Kasten V80 Pritsche/Fahrgestell V90 Bus Other / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
