MG Midget
We offer lift kits for all models from MG:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
You want your Alfa Romeo in 1900 Increase? Thanks to our SPACCER ® Höherlegungssystem, which was manufactured from quality special aluminum, something like this is easy. The SPACCER ® spiral ring is made to measure each spring millimeter. Thanks to our SPACCER ® Your car can be set up to 5cm higher. The benefits are greater ground clearance and leveling with permanent load. Every time when your car is frequently driven by a trailer, our patented lift kit is suitable. The latter can be mounted on a wheel, or only at the front axle, only the vehicle rear axle and also the front and rear axle. Our SPACCER ® is supplied complete with a TÜV report. Other benefits include significantly increased ease of entry, improving your wheel clearance and on top of that you will give your car a sporty yet sporting and commercial vehicles look. The SPACCER ® Höherlegungssystem can also be fitted with already lowered cars.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| MG Midget 1.3 | -- | 1275 ccm, 48 KW, 65 PS | 1967/01-1974/09 |
| MG Midget 1.5 | -- | 1493 ccm, 49 KW, 66 PS | 1974/09-1979/12 |
| MG Midget 1.1 | -- | 1098 ccm, 41 KW, 56 PS | 1964/01-1966/12 |
SPACCER fitting following suspension springs
SPACCER® will fit MG Midget original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- MG Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
Please select:
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
1300 MK II Cyberster Express Express Kasten Express Kasten/Schrägheck GT IM5 IM6 Coupe Maestro Magnette Marvel R Metro MG 3 MG 350 MG 4 MG 5 MG 5 Kombi MG 5 Schrägheck MG 6 MG 6 Schrägheck MG 6 Stufenheck MG 7 MG GS MG HS MG TF MG X-Power MG ZR MG ZS MG ZS Geländewagen Geschlossen MG ZS Hatchback MG ZS SUV MG ZT MG ZT- T MG750 MGA MGA Cabriolet MGA Coupe MGB MGB Cabriolet MGB GT MGC MGC GT MGF MGR V8 MGS5 MGS6 MGY MGY Cabriolet MGY Schrägheck Midget Montego ONE RX8 RX9 TC Stufenheck Whale ZX Other / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
