Talbot Avenger
We offer lift kits for all models from Talbot:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
Would you like your Alfa Romeo 1750-2000 Higher Place? Using the SPACCER ®, which has been manufactured from qualitative special aluminum, the latter is easy to implement. The spiral ring is made to measure each spring millimeter. Thanks to your new SPACCER ® Your vehicle can be set up to 5cm higher. The benefits are more ground clearance and a leveling under extreme load. Just then when your car is frequently driven by a trailer, our lift kit is suitable. The latter can be fitted to a wheel, or only at the front axle, only the vehicle rear axle and also the front and rear axle. Our SPACCER ® is handed out including a TÜV test document. Other benefits include significantly improved ease of entry, improving wheel clearance and also give your car a more sporty off-road look. Our Höherlegungssystem can also be retrofitted on lowered cars.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Talbot Avenger 1.6 | -- | 1592 ccm, 51 KW, 69 PS | 1973/09-1975/04 |
| Talbot Avenger 1.3 | -- | 1295 ccm, 44 KW, 60 PS | 1970/02-1981/07 |
| Talbot Avenger 1.6 | -- | 1598 ccm, 51 KW, 70 PS | 1970/02-1981/07 |
| Talbot Avenger 1.6 | -- | 1598 ccm, 59 KW, 81 PS | 1970/02-1981/07 |
SPACCER fitting following suspension springs
SPACCER® will fit Talbot Avenger original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Talbot Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
Please select:
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .
Other model
1307-1510 160 180 Avenger Avenger Estate Express 1000 -1500 Bus Express 1000 -1500 Pritsche/Fahrgestell Express 1000 -1800 Kasten Horizon Matra Bagheera Murena Rancho Samba Samba Cabriolet Simca 1000 Simca 1100 Break/Tourisme Simca 1100 Schrägheck Simca 1200 S Coupe Simca 1300 Simca 1301 Simca 1301 Tourisme Simca 1500 Simca 1500 Break Simca 1501 Simca 1501 Break/Tourisme Simca 1609/1610 Simca Sim`4 Simca Sunbeam Solara Tagora Other / New modelOfficial original equipment manufacturer (OEM)
We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.
