Skip to main navigation Skip to main content Skip to page footer
Volvo

Volvo 480 E

We offer lift kits for all models from Volvo:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

Would you like your Alfa Romeo 1750-2000 Higher Place? Using the SPACCER ®, which has been manufactured from qualitative special aluminum, the latter is easy to implement. The spiral ring is made to measure each spring millimeter. Thanks to your new SPACCER ® Your vehicle can be set up to 5cm higher. The benefits are more ground clearance and a leveling under extreme load. Just then when your car is frequently driven by a trailer, our lift kit is suitable. The latter can be fitted to a wheel, or only at the front axle, only the vehicle rear axle and also the front and rear axle. Our SPACCER ® is handed out including a TÜV test document. Other benefits include significantly improved ease of entry, improving wheel clearance and also give your car a more sporty off-road look. Our Höherlegungssystem can also be retrofitted on lowered cars.

SPACCER fitting following models/variants
Model Platform Engine Year of Manufacture
Volvo 480 E 1.7 Turbo 482 1721 ccm, 90 KW, 122 PS 1991/01-1996/07
Volvo 480 E 1.7 482 1721 ccm, 70 KW, 95 PS 1987/08-1989/07
Volvo 480 E 1.7 482 1721 ccm, 75 KW, 102 PS 1989/08-1996/07
Volvo 480 E 1.7 482 1721 ccm, 78 KW, 106 PS 1986/04-1989/07
Volvo 480 E 1.7 Turbo 482 1721 ccm, 88 KW, 120 PS 1987/08-1996/07
Volvo 480 E 2.0 482 1998 ccm, 81 KW, 110 PS 1992/08-1995/09
Volvo 480 E 1.7 482 1721 ccm, 80 KW, 109 PS 1986/08-1988/07
SPACCER fitting following suspension springs

SPACCER® will fit Volvo 480 E original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Volvo Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Volvo 480 E
SPACCER® improves your chassis
book Volvo book Volvo

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: