Audi V8
We offer lift kits for all models from Audi:
Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.
SPACCER® offers the following benefits:
- Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
- Especially suitable for vehicles often used for towing trailers
- Improved entry comfort
- Level control for permanent loads
- Enhanced body-to-tire clearance
- More sportive off-road look
- Also for vehicles which have been lowered
- SPACCER® comes with a TÜV test report and a detailed installation guide
Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.
Would you like your Alfa Romeo 2300 height Upgraten? Thanks to the Höherlegungssystem, which was made of special quality aluminum, the latter is easy to implement. The spiral ring probe range produces every spring matching exactly. Thanks to our SPACCER ® Your car can be set up to 5cm higher. The benefits are more ground clearance and a leveling under extreme load. Especially if your car is frequently driven by a trailer, our SPACCER suited ® suspension lift. The latter can be mounted on a wheel, or only at the front axle, only the vehicle rear axle and also the front and rear axle. Each SPACCER ® is handed out including a TÜV test document. Other advantages include the significantly higher entry comfort, improve wheel clearance and also give your car a more sporty off-road look. Our Höherlegungssystem can also be retrofitted to already lowered cars.
SPACCER fitting following models/variants
| Model | Platform | Engine | Year of Manufacture |
|---|---|---|---|
| Audi V8 3.6 quattro | 441, 442, 4C2, 4C8 | 3562 ccm, 180 KW, 245 PS | 1993/04-1994/02 |
| Audi V8 4.2 quattro | 441, 442, 4C2, 4C8 | 4172 ccm, 206 KW, 280 PS | 1991/10-1994/02 |
| Audi V8 3.6 quattro | 441, 442, 4C2, 4C8 | 3562 ccm, 184 KW, 250 PS | 1988/10-1994/02 |
SPACCER fitting following suspension springs
SPACCER® will fit Audi V8 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).
- Audi Original spring
- Bilstein
- Eibach
- GKN
- H&R
- JOM
- KW
- KYB
- MAD
- Monroe
- Sachs
- TRW
- Vogtland
- Weitec
Please select:
SPACCER® improves your chassis
On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .