Skip to main content

SPACCER® is the lifting solution for all makes and models

The SPACCER® lifting system provides an easy and fast method for lifting your vehicle front and/or rear by up to 48 mm (1.89 in).

Your benefits:

Raise vehicle very simple

Every car manufacturer has already technically prepared and tested the raising with the help of a SPACCER® system. Therefore, everything is documented in accordance with the requirements of the TÜV/DEKRA according to § 21 or 19 (2). The German Federal Motor Transport Authority (KBA) lays down clear specifications for the raising of vehicles in Merkblatt 751 Annex 2. The Spaccer system complies with all specifications regarding axle geometry, toe, camber, drive shafts and brake hoses. To determine how high the vehicle can technically be raised, you only need to measure the residual spring travel according to our instructions. Possible heights are 12mm (0.47"), 15mm (0.59"), 24mm (0.94"), 27mm (1.06"), 30mm (1.18"), 36mm (1.42"), 39mm (1.54"), 42mm (1.65"), 45mm (1.77"), 48mm (1.89") oder 60mm (2.36").

The Kraftfahrttechnisches Prüf- und Ingenieurszentrum FAKT GmbH tests for SPACCER according to DIN/ISO 17025/17020

More information

FAKT GmbH designated and accredited as testing laboratory and technical service in Germany / Switzerland / Italy / Spain / China
www.fakt.com

SPACCER® fit in all vehicles

SPACCER® will fit all original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

370

Maker

8.282

Models

68.161

Suspension springs