Skip to main content
Alpina

Alpina B10

We offer lift kits for all models from Alpina:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Alpina. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Alpina B10 4.6E344619 ccm, 250 KW, 340 PS1994/03-1995/04
Alpina B10 3.2E393152 ccm, 191 KW, 260 PS1997/08-1998/12
Alpina B10 3.4 BiTurboE343430 ccm, 265 KW, 360 PS1989/01-1993/06
Alpina B10 3.4E343430 ccm, 187 KW, 254 PS1988/04-1992/12
Alpina B10 3.0 AWDE342997 ccm, 170 KW, 231 PS1993/10-1995/03
Alpina B10 4.6 V8E394619 ccm, 255 KW, 347 PS1998/10-2002/09
Alpina B10 4.6 V8E394619 ccm, 250 KW, 340 PS1996/12-1998/10
Alpina B10 4.8 V8E394837 ccm, 276 KW, 375 PS2002/01-2004/05
Alpina B10 4.0E343982 ccm, 232 KW, 316 PS1993/04-1994/11
Alpina B10 3.3E393298 ccm, 206 KW, 280 PS1999/01-2003/02
SPACCER fitting following suspension springs

SPACCER® will fit Alpina B10 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Alpina Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Alpina B10
SPACCER® improves your chassis
book Alpinabook Alpina

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: