Skip to main content
DS

DS DS3

We offer lift kits for all models from DS:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your DS. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
DS DS3 1.6 THP 208SA1598 ccm, 153 KW, 208 PS2015/09-2019/07
DS DS3 1.6 BlueHdi 100SA1560 ccm, 73 KW, 99 PS2015/04-2019/07
DS DS3 1.6 BlueHdi 120SA1560 ccm, 88 KW, 120 PS2015/07-2019/07
DS DS3 1.2 THP 130SA1199 ccm, 96 KW, 130 PS2015/09-2019/07
DS DS3 1.6 BlueHdi 75SA1560 ccm, 55 KW, 75 PS2015/07-2019/07
DS DS3 1.6 THPSA1598 ccm, 120 KW, 163 PS2015/07-2019/07
DS DS3 1.4 HDi 70SA1398 ccm, 50 KW, 68 PS2015/07-2016/12
DS DS3 1.2 THP 110/PureTech 110SA1199 ccm, 81 KW, 110 PS2015/04-2019/07
DS DS3 1.2 VTi 82SA1199 ccm, 60 KW, 82 PS2015/04-2019/07
DS DS3 1.6 THP 165SA1598 ccm, 121 KW, 165 PS2015/07-2019/07
DS DS3 1.6 THPSA1598 ccm, 110 KW, 150 PS2015/07-2019/07
DS DS3 1.6 BlueHdi 116SA1560 ccm, 85 KW, 116 PS2015/07-2019/07
SPACCER fitting following suspension springs

SPACCER® will fit DS DS3 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • DS Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
DS DS3
SPACCER® improves your chassis
book DSbook DS

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: