Skip to main content
Jeep

Jeep CJ5 - CJ8

We offer lift kits for all models from Jeep:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Jeep. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Jeep CJ5 - CJ8 2.1 D--2068 ccm, 44 KW, 60 PS1983/01-1987/12
Jeep CJ5 - CJ8 4.2--4235 ccm, 76 KW, 103 PS1972/01-1987/12
Jeep CJ5 - CJ8 2.5--2464 ccm, 78 KW, 106 PS1984/01-1987/12
Jeep CJ5 - CJ8 2.0--1995 ccm, 63 KW, 85 PS1983/01-1987/12
Jeep CJ5 - CJ8 5.0--4981 ccm, 89 KW, 121 PS1973/01-1981/12
Jeep CJ5 - CJ8 2.5--2471 ccm, 65 KW, 88 PS1979/09-1983/12
Jeep CJ5 - CJ8 3.7--3691 ccm, 110 KW, 150 PS1966/01-1971/12
Jeep CJ5 - CJ8 2.4 D--2370 ccm, 44 KW, 60 PS1983/01-1987/12
Jeep CJ5 - CJ8 3.8--3800 ccm, 74 KW, 100 PS1972/01-1978/12
SPACCER fitting following suspension springs

SPACCER® will fit Jeep CJ5 - CJ8 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Jeep Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Jeep CJ5 - CJ8
SPACCER® improves your chassis
book Jeepbook Jeep

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: