Skip to main content
KIA

KIA Cadenza II

We offer lift kits for all models from KIA:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your KIA. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
KIA Cadenza II 3.3 GDiYG3342 ccm, 213 KW, 290 PS2016/01-2019/06
KIA Cadenza II 3.3 GDiYG3342 ccm, 209 KW, 284 PS2016/01-2023/12
KIA Cadenza II 3.5 CVVTYG3470 ccm, 213 KW, 290 PS2019/11-2023/12
KIA Cadenza II 3.3 MPiYG3342 ccm, 199 KW, 271 PS2016/01-2023/12
KIA Cadenza II 3.3YG3342 ccm, 191 KW, 260 PS2016/01-2023/12
SPACCER fitting following suspension springs

SPACCER® will fit KIA Cadenza II original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • KIA Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
KIA Cadenza II
SPACCER® improves your chassis
book KIAbook KIA

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Other model

AvellaAvella SchrägheckBesta BusBesta KastenBongo BusBongo GroßraumlimousineBongo KastenBongo Pritsche/FahrgestellBorregoCadenzaCadenza ICadenza IICarens ICarens IICarens II GroßraumlimousineCarens IIICarens III GroßraumlimousineCarens IVCarens IV VanCarnivalCarnival / Grand Carnival IIICarnival ICarnival IICarnival IIICarnival IVCee`DCee`D Combi VanCee`D KombiCee`D SchrägheckCee`D SportswagonCee`D SWCeed Hatchback VanCeratoCerato IICerato II StufenheckCerato KoupCerato Koup CoupeCerato SchrägheckCerato StufenheckCeresClarusClarus KombiConcord StufenheckCredosElanEnterpriseEV6EV9JoiceK2500K2500 Pick-upK2700K2900K3600K3600 Pritsche/FahrgestellK8K9MagentisMentorMentor/ShumaNiroNiro IINiro VanOpirusOptimaOptima SportswagonPicantoPregioPregio BusPregio KastenPridePride KombiPride StufenheckPride VanPro Cee`DPro Cee`D Hatchback VanProceed Combi VanQuorisRayRetonaRetona Geländewagen GeschlossenRioRio IIRio II StufenheckRio IIIRio III Hatchback VanRio III StufenheckRio IVRio IV Hatchback VanRio IV StufenheckRio KombiRio SchrägheckRio StufenheckRio X-Line IV SchrägheckRoadsterRondo IIIRondo IVSedonaSeltosSephiaSephia StufenheckShumaShuma IIShuma II StufenheckShuma StufenheckSorentoSorento ISorento I VanSorento IISorento II Kasten/SUVSorento IIISorento IVSoulSoul IISoul IIISoul III CargoSpectra IISportageSportage SUVSportage VSportage VanStingerStinger Hatchback VanStonicStonic Hatchback VanTowner BusTowner KastenTrade Pritsche/FahrgestellVengaVenga Hatchback VanVigatoVistoXceedXceed VanOther / New model

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: