Skip to main content
Mazda

Mazda 3 Kasten/Schrägheck

We offer lift kits for all models from Mazda:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Mazda. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Mazda 3 Kasten/Schrägheck 2.0BM1998 ccm, 88 KW, 120 PS2015/04-2016/05
Mazda 3 Kasten/Schrägheck 2.0BM1998 ccm, 121 KW, 165 PS2015/04-2016/05
Mazda 3 Kasten/Schrägheck 1.5BM1496 ccm, 74 KW, 101 PS2015/04-2016/05
Mazda 3 Kasten/Schrägheck 2.2 DBM2191 ccm, 110 KW, 150 PS2015/04-2016/05
SPACCER fitting following suspension springs

SPACCER® will fit Mazda 3 Kasten/Schrägheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Mazda Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Mazda 3 Kasten/Schrägheck
SPACCER® improves your chassis
book Mazdabook Mazda

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Other model

1000121 I121 II121 III121 III Kasten/Schrägheck121 Metro13001800 Stufenheck22 Schrägheck2 Stufenheck33 Kasten/Schrägheck3 Schrägheck3 Stufenheck323323 Astina IV323 Astina V323 Astina VI323 C IV323 C V323 F IV323 F V323 F VI323 I323 I Station Wagon323 II323 II Hatchback323 III323 III Hatchback323 III Station Wagon323 IV323 P V323 Protege V323 Protege VI323 S IV323 S V323 S VI566 Hatchback6 Kasten/Kombi6 Kombi6 Schrägheck6 Sport6 Sport Kombi6 Station Wagon6 Stufenheck616626 I626 I Coupe626 II626 II Coupe626 II Hatchback626 III626 III Coupe626 III Hatchback626 III Station Wagon626 IV626 IV Hatchback626 V626 V Hatchback626 V Station Wagon8818818 Coupe818 Kombi929 I929 I Kombi929 II929 II Coupe929 II Kombi929 III929 IV929 VAZ WagonAZ1AzoffroadB-SerieB-Serie Pritsche/FahrgestellB-SeriesB-Series (Inc Bravo)B-Series BravoBianteBongo FriendeeBongo Truck Pritsche/FahrgestellBongo Van BusBongo Van KastenBT-50BT-50 II Pick-upBT-50 Pick-UpBT-50 Pritsche/FahrgestellCarolCX-3CX-30CX-5CX-5 VanCX-60CX-7CX-9DemioE BusE-Serie BusE-Serie GroßraumlimousineE-Serie KastenE-Serie Pritsche/FahrgestellE-SeriesEunos 30XFamilia IVFamilia VanFestivaFighter Pick-upFlairFlair CrossoverFlair WagonJ80 BusMilleniaMPV IMPV IIMPV IIIMX-3MX-30MX-5 IMX-5 IIMX-5 IIIMX-5 IVMX-5 RFMX-5 RF TargaMX-6Navajo Geländewagen GeschlossenPremacyPremacy VanRustlerRX 5RX 7 IRX 7 IIRX 7 II CabrioletRX 7 IIIRX 8RX-2 CoupeRX-2 StufenheckRX-4 CoupeRX-9ScrumScrum TruckSpectronTributeVerisaVX-1Xedos 6Xedos 9Other / New model

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: