Skip to main content
Pagani

Pagani Zonda Coupe

We offer lift kits for all models from Pagani:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Pagani. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Pagani Zonda Coupe 7.3--7291 ccm, 499 KW, 678 PS2009/06-2013/05
Pagani Zonda Coupe 6.0--5987 ccm, 294 KW, 400 PS1999/06-2002/05
Pagani Zonda Coupe 6.0--5987 ccm, 551 KW, 749 PS2009/06-2023/12
Pagani Zonda Coupe S 7.3--7291 ccm, 408 KW, 555 PS2004/01-2013/12
Pagani Zonda Coupe F 7.3--7291 ccm, 443 KW, 602 PS2005/06-2009/05
Pagani Zonda Coupe 7.3--7291 ccm, 493 KW, 670 PS2010/06-2013/05
Pagani Zonda Coupe 6.0--5987 ccm, 588 KW, 799 PS2013/06-2013/12
Pagani Zonda Coupe 6.0--5987 ccm, 331 KW, 450 PS1999/06-2002/05
SPACCER fitting following suspension springs

SPACCER® will fit Pagani Zonda Coupe original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Pagani Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Pagani Zonda Coupe
SPACCER® improves your chassis
book Paganibook Pagani

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: