Skip to main content
Porsche

Porsche Boxster

We offer lift kits for all models from Porsche:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Porsche. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Porsche Boxster S 3.29863179 ccm, 191 KW, 260 PS2002/07-2004/12
Porsche Boxster S 3.29873179 ccm, 206 KW, 280 PS2004/11-2006/12
Porsche Boxster 2.79872687 ccm, 180 KW, 245 PS2006/07-2009/12
Porsche Boxster S 3.29863179 ccm, 185 KW, 252 PS1999/08-2002/07
Porsche Boxster S 3.49873387 ccm, 223 KW, 303 PS2008/08-2009/12
Porsche Boxster 2.79862687 ccm, 155 KW, 211 PS1999/06-2002/12
Porsche Boxster S 3.49873387 ccm, 220 KW, 299 PS2006/07-2008/12
Porsche Boxster 2.79872687 ccm, 179 KW, 243 PS2006/09-2008/12
Porsche Boxster 2.99872893 ccm, 155 KW, 211 PS2009/02-2012/03
Porsche Boxster 2.79862687 ccm, 162 KW, 220 PS1999/08-2002/07
Porsche Boxster 2.99872893 ccm, 188 KW, 255 PS2009/06-2012/03
Porsche Boxster 2.79862687 ccm, 168 KW, 228 PS2002/07-2004/12
Porsche Boxster S 3.29863179 ccm, 196 KW, 266 PS2004/01-2004/12
Porsche Boxster 2.79812706 ccm, 195 KW, 265 PS2012/04-2016/12
Porsche Boxster S 3.49873387 ccm, 217 KW, 295 PS2006/07-2009/12
Porsche Boxster 2.59862480 ccm, 150 KW, 204 PS1996/09-1999/08
Porsche Boxster 2.79872687 ccm, 176 KW, 240 PS2004/11-2006/12
Porsche Boxster S 3.49873436 ccm, 228 KW, 310 PS2009/06-2011/12
Porsche Boxster S 3.49813436 ccm, 232 KW, 315 PS2012/04-2016/12
Porsche Boxster GTS 3.49813436 ccm, 243 KW, 330 PS2014/02-2016/12
Porsche Boxster 2.79812706 ccm, 155 KW, 211 PS2012/04-2023/12
Porsche Boxster S 3.49873436 ccm, 235 KW, 320 PS2010/08-2012/05
SPACCER fitting following suspension springs

SPACCER® will fit Porsche Boxster original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Porsche Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Porsche Boxster
SPACCER® improves your chassis
book Porschebook Porsche

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: