Skip to main content
Saab

Saab 9000

We offer lift kits for all models from Saab:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Saab. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Saab 9000 2.0 -16 CD--1985 ccm, 96 KW, 131 PS1993/09-1998/12
Saab 9000 2.0 -16 CD--1985 ccm, 110 KW, 150 PS1993/09-1998/12
Saab 9000 2.0--1985 ccm, 99 KW, 135 PS1988/10-1990/08
Saab 9000 2.3 -16 CDE--2290 ccm, 108 KW, 147 PS1993/09-1998/12
Saab 9000 2.3--2290 ccm, 110 KW, 150 PS1989/10-1992/01
Saab 9000 2.3 -16 CD Turbo--2290 ccm, 147 KW, 200 PS1990/07-1998/12
Saab 9000 2.0 -16 Turbo CD--1985 ccm, 108 KW, 147 PS1992/09-1998/12
Saab 9000 2.0 -16 Turbo--1985 ccm, 127 KW, 172 PS1990/03-1993/09
Saab 9000 2.3--2290 ccm, 165 KW, 224 PS1990/09-1998/10
Saab 9000 2.3 -16 CDE Eco Power--2290 ccm, 125 KW, 170 PS1993/09-1998/12
Saab 9000 3.0 -24 V6 CD/CDE--2962 ccm, 155 KW, 211 PS1994/07-1998/12
Saab 9000 2.0 T16--1985 ccm, 150 KW, 204 PS1989/06-1990/10
Saab 9000 2.0 -16 Turbo--1985 ccm, 129 KW, 175 PS1985/04-1991/12
Saab 9000 2.0 -16--1985 ccm, 94 KW, 128 PS1989/01-1993/01
Saab 9000 2.0 -16 Turbo--1985 ccm, 118 KW, 160 PS1988/05-1993/08
Saab 9000 2.0 -16 Turbo CD--1985 ccm, 120 KW, 163 PS1988/09-1993/08
Saab 9000 2.0 -16 Turbo CD--1985 ccm, 136 KW, 185 PS1989/09-1998/12
Saab 9000 2.0 Carlsson--1985 ccm, 143 KW, 195 PS1989/09-1990/08
Saab 9000 2.3 -16 CD--2290 ccm, 107 KW, 146 PS1989/08-1998/12
Saab 9000 2.3 -16 Turbo--2290 ccm, 143 KW, 195 PS1990/09-1998/12
SPACCER fitting following suspension springs

SPACCER® will fit Saab 9000 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Saab Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Saab 9000
SPACCER® improves your chassis
book Saabbook Saab

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: