Skip to main content
BMW

BMW Z3 Roadster

We offer lift kits for all models from BMW:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your BMW. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
BMW Z3 Roadster 1.8iE361796 ccm, 85 KW, 116 PS1995/10-1998/10
BMW Z3 Roadster 2.8iE362793 ccm, 142 KW, 193 PS1997/04-2000/05
BMW Z3 Roadster 1.9iE361895 ccm, 87 KW, 118 PS1998/07-2003/01
BMW Z3 Roadster 1.9iE361895 ccm, 85 KW, 116 PS1999/01-2003/01
BMW Z3 Roadster 2.2iE362171 ccm, 120 KW, 163 PS2000/08-2003/01
BMW Z3 Roadster 2.5iE362494 ccm, 141 KW, 192 PS2000/10-2002/08
BMW Z3 Roadster 3.0iE362979 ccm, 170 KW, 231 PS2000/06-2003/01
BMW Z3 Roadster 2.0iE361990 ccm, 110 KW, 150 PS1999/04-2003/01
BMW Z3 Roadster 1.9iE361895 ccm, 103 KW, 140 PS1995/10-1999/03
BMW Z3 Roadster M 3.2E363152 ccm, 179 KW, 243 PS1998/02-2000/06
BMW Z3 Roadster M 3.2E363201 ccm, 236 KW, 321 PS1997/03-2000/06
BMW Z3 Roadster 2.2iE362171 ccm, 125 KW, 170 PS2000/08-2002/06
BMW Z3 Roadster M 3.2E363246 ccm, 239 KW, 325 PS2001/06-2003/01
BMW Z3 Roadster 2.8iE362793 ccm, 143 KW, 194 PS1996/01-2000/05
SPACCER fitting following suspension springs

SPACCER® will fit BMW Z3 Roadster original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • BMW Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
BMW Z3 Roadster
SPACCER® improves your chassis
book BMWbook BMW

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: