Skip to main content
Rover

Rover 400

We offer lift kits for all models from Rover:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Rover. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Rover 400 420 Si LuxRT1994 ccm, 100 KW, 136 PS1995/12-2000/03
Rover 400 420dRT1994 ccm, 63 KW, 86 PS1995/11-2000/03
Rover 400 414 GSi/SiXW1396 ccm, 66 KW, 90 PS1990/04-1995/04
Rover 400 416 SiRT1590 ccm, 85 KW, 116 PS1995/05-2000/03
Rover 400 418dXW1905 ccm, 49 KW, 67 PS1991/09-1995/04
Rover 400 416 GSiXW1590 ccm, 82 KW, 112 PS1990/04-1995/04
Rover 400 414 SiRT1396 ccm, 76 KW, 103 PS1995/05-2000/03
Rover 400 418 TDXW1769 ccm, 65 KW, 88 PS1991/09-1995/04
Rover 400 416 SiRT1590 ccm, 83 KW, 113 PS1995/05-1999/06
Rover 400 416 GTi/GTEXW1590 ccm, 96 KW, 131 PS1990/04-1995/04
Rover 400 420 TurboXW1994 ccm, 147 KW, 200 PS1993/01-1995/04
Rover 400 414RT1396 ccm, 55 KW, 75 PS1996/03-1999/12
Rover 400 416 SiRT1588 ccm, 82 KW, 112 PS1995/05-2000/03
Rover 400 414XW1396 ccm, 70 KW, 95 PS1993/01-1995/04
Rover 400 420 GTi/GSi/VitesseXW1994 ccm, 103 KW, 140 PS1992/02-1995/04
Rover 400 416 GTiXW1590 ccm, 90 KW, 122 PS1990/04-1995/04
Rover 400 414 GSi/Si CatXW1396 ccm, 76 KW, 103 PS1992/10-1995/04
Rover 400 420 DiRT1994 ccm, 77 KW, 105 PS1995/05-2000/03
Rover 400 420 GSi/SLi/GTi/ViteXW1994 ccm, 100 KW, 136 PS1993/01-1995/04
Rover 400 416 GSi/GSEXW1590 ccm, 85 KW, 116 PS1990/04-1995/04
Rover 400 2.0 Turbo GSI SportXW1994 ccm, 152 KW, 207 PS1992/10-1995/04
SPACCER fitting following suspension springs

SPACCER® will fit Rover 400 original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Rover Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Rover 400
SPACCER® improves your chassis
book Roverbook Rover

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: