Skip to main content
Rover

Rover 800 Schrägheck

We offer lift kits for all models from Rover:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Rover. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Rover 800 Schrägheck 820 16V TurboXS1996 ccm, 132 KW, 180 PS1991/11-1999/02
Rover 800 Schrägheck 820 i/SiXS1996 ccm, 100 KW, 136 PS1991/01-1999/02
Rover 800 Schrägheck 820XS1994 ccm, 120 KW, 163 PS1988/10-1991/10
Rover 800 Schrägheck 827 Vitesse Catalytic-ConvXS2675 ccm, 124 KW, 169 PS1988/10-1991/12
Rover 800 Schrägheck 825 D/SDXS2500 ccm, 87 KW, 118 PS1992/01-1999/02
Rover 800 Schrägheck 820 SiXS1994 ccm, 98 KW, 133 PS1988/10-1991/12
Rover 800 Schrägheck 820 SportXS1994 ccm, 145 KW, 197 PS1994/04-1996/03
Rover 800 Schrägheck 2.0XS1994 ccm, 74 KW, 101 PS1987/08-1991/10
Rover 800 Schrägheck 827 Vitesse/SLiXS2675 ccm, 130 KW, 177 PS1988/10-1991/12
Rover 800 Schrägheck 2.5 SiXS2497 ccm, 129 KW, 175 PS1996/02-1998/10
Rover 800 Schrägheck 2.5XS2497 ccm, 129 KW, 175 PS1996/02-1998/10
Rover 800 Schrägheck 820 i/SiXS1994 ccm, 103 KW, 140 PS1988/10-1991/12
Rover 800 Schrägheck 820 SE/SiXS1994 ccm, 88 KW, 120 PS1986/10-1991/12
Rover 800 Schrägheck 827 24V i/Si CatXS2675 ccm, 124 KW, 169 PS1992/01-1999/02
Rover 800 Schrägheck 2.0XS1994 ccm, 100 KW, 136 PS1987/08-1988/09
Rover 800 Schrägheck 2.5 SterlingXS2494 ccm, 110 KW, 150 PS1988/10-1991/10
SPACCER fitting following suspension springs

SPACCER® will fit Rover 800 Schrägheck original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Rover Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Rover 800 Schrägheck
SPACCER® improves your chassis
book Roverbook Rover

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: