Skip to main content
Holden

Holden Rodeo Pritsche/Fahrgestell

We offer lift kits for all models from Holden:

Vehicle heightening kit for more ground clearance. A SPACCER®-heightening set consists of two SPACCERs. One for the left and one for the right wheel of each axle. The patented SPACCER® can be stacked on top of each other and thus allow a step-by-step raising of 12mm (1 set = 2 SPACCER®) / 24mm (2 set = 4 SPACCERs) / 36mm (3 set = 6 SPACCERs) / 48mm (4 set = 8 SPACCERs). The SPACCER® are black anodized and thus blend in visually discreetly with the strut/spring. Quality Made in Germany. Since each SPACCER is individually adapted to the respective shock absorber/suspension of your vehicle, we need the chassis number (FIN) of your vehicle after ordering. The delivery time is approx. 8-14 days for the SPACCER® milled from aluminum. Through a modern 3D production process, you will always receive 100% precisely fitting goods. The delivery always includes all small parts and accessories as well as TÜV test certificates. The detailed assembly instructions with illustrations guarantee a simple and fast assembly. Since SPACCER® are not a closed ring, they can be pushed directly into the shock absorber without removing the spring.

SPACCER® offers the following benefits:

  • Increased clearance - 12 mm, 24 mm, 36 mm or 48 mm (.47 in, .94 in, 1.42 in or 1.89 in)
  • Especially suitable for vehicles often used for towing trailers
  • Improved entry comfort
  • Level control for permanent loads
  • Enhanced body-to-tire clearance
  • More sportive off-road look
  • Also for vehicles which have been lowered
  • SPACCER® comes with a TÜV test report and a detailed installation guide

Your SPACCER® lifting kit is made of a special aluminum. Based on model, type and VIN, each SPACCER® is custom-made for each spring. Therefore, SPACCER® are always a 100 % fit for your car.

The SPACCER car lift kit for your Holden. The high quality spiral ring is made of special aluminum. Due to custom-made parts based on chassis number it fits 100The SPACCER-system also reduces noises such as chattering, clatter, knocking and rattling. And the installation is very quick and easy.

SPACCER fitting following models/variants
ModelPlatformEngineYear of Manufacture
Holden Rodeo Pritsche/Fahrgestell 3.5iRA3494 ccm, 147 KW, 200 PS2003/02-2005/12
Holden Rodeo Pritsche/Fahrgestell 3.2i 4x4TF3165 ccm, 140 KW, 190 PS1998/03-2003/02
Holden Rodeo Pritsche/Fahrgestell 3.5i 4x4RA3494 ccm, 147 KW, 200 PS2003/02-2005/12
Holden Rodeo Pritsche/Fahrgestell 3.2iTF3165 ccm, 140 KW, 190 PS1998/02-2003/02
Holden Rodeo Pritsche/Fahrgestell 2.6iTF2559 ccm, 88 KW, 120 PS1988/02-1998/02
Holden Rodeo Pritsche/Fahrgestell 2.4iRA2405 ccm, 94 KW, 128 PS2003/08-2008/07
Holden Rodeo Pritsche/Fahrgestell 3.0 DiTDRA2999 ccm, 117 KW, 159 PS2007/01-2008/10
Holden Rodeo Pritsche/Fahrgestell 2.6i 4x4TF2559 ccm, 88 KW, 120 PS1988/02-1998/06
Holden Rodeo Pritsche/Fahrgestell 2.8 TDTF2771 ccm, 74 KW, 101 PS1990/05-2003/02
SPACCER fitting following suspension springs

SPACCER® will fit Holden Rodeo Pritsche/Fahrgestell original springs and all accessory springs, coil springs and leaf springs. The lift kit can be installed on both standard oil shock absorbers and gas shock absorbers (air suspension).

  • Holden Original spring
  • Bilstein
  • Eibach
  • GKN
  • H&R
  • JOM
  • KW
  • KYB
  • MAD
  • Monroe
  • Sachs
  • TRW
  • Vogtland
  • Weitec
Holden Rodeo Pritsche/Fahrgestell
SPACCER® improves your chassis
book Holdenbook Holden

On 230 pages you will find all details on suspension technology explained in detail in the new book "Die perfekte Fahrwerkshöherlegung". Now available here at www.spaccer.com .

Official original equipment manufacturer (OEM)

We supply manufacturers, dealers, workshops and vehicle converters of all brands.
You can also order SPACCER® directly from the manufacturer on their original homepage.

Start a video to learn how to order SPACCER® directly from the manufacturer: